Capt Problems - Canon IMAGECLASS D700 Series Printer Manual

iR1210G_iR1230G.book Page 4 Tuesday, June 24, 2003 2:22 PM

CAPT Problems

CAPT Problems

CAPT Problems CAPT Problems
Problem
CAPT is not working
properly
Cannot use Adobe Type
Manager (ATM) fonts
Cannot print with a
printer driver other than
the Canon PC1200/iC
D700
CD-ROM Menu doesn't
appear automatically
Cause
The CAPT (Canon
PC1200/iC D700) is
not selected as the
default printer driver
for
imageCLASS D700
series.
The software might not
be installed properly.
The printer driver is
connected to the same
port as the Canon
PC1200/iC D700
printer driver.
Autorun CD-ROM
Menu checkbox is
unchecked in the CD-
ROM menu.
The "Auto insert
notification" checkbox
is unchecked.
Solution
Specify the CAPT (Canon PC1200/iC
D700) as the default driver for the
imageCLASS D700 series.
Refer to "Using the Trouble Shooter" on
page 5-8.
To check if the CAPT is installed
correctly, try printing a page from an
application. If the print fails, the CAPT is
not installed correctly. Remove the CAPT
and install it again. For more information,
see "Uninstalling the CAPT" on page 5-
10.
Adobe Type Manager (ATM) is not
supported.
Connect the printer driver to a port
different from the Canon PC1200/iC
D700 printer driver.
Start the CD-ROM menu manually, and
check the "Autorun CD-ROM Menu"
checkbox.
From the Device Manager make sure that
the "Auto insert notification" checkbox
is checked in the CD-ROM drive
Properties dialog box. For more
information, see Windows Help.
5
5-4