Printer Problems - Canon IMAGECLASS D700 Series Printer Manual

iR1210G_iR1230G.book Page 2 Tuesday, June 24, 2003 2:22 PM

Printer Problems

Printer Problems

Printer Problems Printer Problems
Problem
Printer does not
print
No power is
supplied
Printer stops
printing
Printer stops
printing
Cause
Paper might not be loaded.
A copy job might not have
been completed due to the
Out of Paper status.
Print jobs might be stalled.
The cartridge might not be
installed correctly.
Your BIOS port setting
might need to be modified.
The parallel cable might not
be compatible.
Your computer might not be
working properly.
Power cord might not be
plugged in.
AC outlet might not be
supplying power.
AC voltage might not match
printer.
Your interface cable might be
loose.
You might be working on an
application in the foreground,
in which case printing
performance might slow down.
Solution
Make sure paper is loaded.
The print job will start automatically
when the copy job is completed. Please,
load paper.
Check the Canon PC1200/iC D700 Status
Window for stalled jobs.
Check that the cartridge is installed
correctly. Set-up Instructions
See your computer's documentation
concerning available ports.
Make sure you are using an 8-bit,
Centronics-compatible, parallel interface
cable with bi-directional capability.
Check your computer, make sure it is
turned on and working properly.
Make sure the power cord is securely
plugged into both the machine and the
AC outlet.
Make sure the AC outlet is supplying
power; try another outlet if necessary.
Make sure the voltage of the AC outlet
matches the ratings on the printer.
Check your computer and your cable.
Printer performance improves if you give
your print job priority.
5
5-2