Table of Contents
Advertisement
...3 OPERATOR VIEWS
3.6 View Logbook
Note. The View Logbook function is available only if
-----
VIEW LOGBOOK
Cals
Power
Errors
-----
Alarms
VIEW LOGBOOK
A1
1
-----
On
02:03:04
15:17
Alarms
Cals
Power
-----
Errors
VIEW LOGBOOK
1
Sen. A
-----
02:03:04
16:44
12
is set to
Logbook
The logbook stores data entries for alarm events, sensor errors, power failures and sensor
calibrations.
View Logbook
Use the
and
keys to access the
Note. If no entries are stored in the
Alarms
The
logbook contains up to 10 entries (entry 1 is the most recent), each comprising
Alarms
an alarm number, alarm state (On or Off), and the date/time of the occurrence.
Operating Page – see Section 2.3.
Diss. Organics
See Section 4.2.
SENSOR CAL
2 A1
Advance to entries 2 to 10.
Note. If no more entries are stored, the display shows
View Logbook
Use the
and
keys to access the
Note. If no entries are stored in the
Errors
The
logbook contains up to 5 entries (entry 1 is the most recent), each comprising
Errors
the sensor letter, error number, and the date/time of the occurrence.
Operating Page – see Section 2.3.
Diss. Organics
See Section 4.2.
SENSOR CAL
Advance to entries 2 to 5.
2 Sen. A
Note. If no more entries are stored, the display shows
– see Section 5.7.
On
logbook.
Alarms
logbook, the display shows
Alarms
logbook.
Errors
logbook, the display shows
Errors
No More Entries
.
No More Entries
.
No More Entries
.
.
No More Entries
Advertisement
Table of Contents
