Page 1
ASSEMBLY INSTRUCTIONS INS696 Revision 0 FBL-699 17/10/2017 3G Weighted UEFA Portagoal net sold separately A minimum of 2 people are required for this assembly mins Estimated 60 minutes assembly time IMPORTANT: Please read these assembly instructions carefully before starting to assemble your Goal...
Code FBL-699 Product 3G Weighted UEFA Portagoal Pack Contents Wtd UEFA Portagoal Crossbar L/H Upright R/H Upright Sidebar Backbar L/H Net Support Bracket R/H Net Support Bracket Net Support FEP360 Solid Ballast Tools Required 1x 17mm Spanner 17mm 1x 4mm Hex Key...
Page 3
Code FBL-699 Product 3G Weighted UEFA Portagoal Pack Contents Wtd UEFA Portagoal 10. Ballast Tube R/H Hi-Raise Wheel 12. L/H Hi-Raise Wheel 13. R/H CAM Raise Wheel 14. L/H CAM Raise Wheel FEP551 FPK282 FEP282 FPK321 *parts are not to scale...
Page 4
Code FBL-699 Product 3G Weighted UEFA Portagoal Fittings Pack Contents FPK699: Weighted UEFA Portagoal Fittings A. L Plate B. Strap Bracket C. Top Bracket D. Net Holder Clip M10 Handwheel M10 Spacer G. M10x30mm Cap Screw PEP062 PEP844 H. M10x40mm Button Screw...
Page 5
Code Code FBL-699 FBL-699 Product Product 3G Weighted UEFA Portagoal 3G Weighted UEFA Portagoal Fittings Pack Contents FPK699: Weighted UEFA Portagoal Fittings N. M10 Nord-Lock Washer O. Net Strap Net Hook Q. 8mm R. 6mm BOL714 STR110 x200 (FPK369) HKS029...
Page 6
Code FBL-699 Product 3G Weighted UEFA Portagoal Assembly Instructions Slide two M10x25mm Square Screws (J) into the Crossbar (1) channel and two into each Upright (2,3). Slide the Uprights over the plate in the Crossbar, leaving no gap. Place an L Plate 17mm (A) over the Square Screws, locating it in the channel of the Crossbar and Upright.
Page 7
Code FBL-699 Product 3G Weighted UEFA Portagoal Slide the Net Support Brackets (6,7) into the Backbar (5) and Sidebar (4), secure in place using a hand tightened M10x30mm Cap Screw (G) in the hole farthest from the bracket tube. Repeat this step for the Sidebars, again hand tightening the M10 Cap Screw in the hole farthest from the bracket tube.
Page 8
Code FBL-699 Product 3G Weighted UEFA Portagoal Fix the CAM Wheels (13, 14) to the Sidebars using two M10 Square Screws (fitted in step 4), two Aluminium Spacers and two M10 Binx Nuts (supplied with FPK321). Fix the Hi-Raise 17mm...
Page 9
Code FBL-699 Product 3G Weighted UEFA Portagoal Slide three M10 Square Screws into the channel in each Net Support (8). From the covered end of the Net Support, slide one M10 Square Screw around a third of the way down and 17mm position the remaining two near the plate.
Code FBL-699 Product 3G Weighted UEFA Portagoal Net Assembly To attach the Net, hook the top corners over the Net Holder Clips and secure with an M6x10mm Button Screw (K). Attach a Net Hook (P) to every other mesh on the Net, insert the Net Hook into the channel in the back of the goal and twist to lock.
Need help?
Do you have a question about the FBL-699 and is the answer not in the manual?
Questions and answers