Harrod SHE-011 Instructions Manual

Code:
SHE-011/016/021/026/031/036/041/046
Product:
Premier Socketed Curved Team Shelter
1. 1 x L/H SIDE FRAME
2. 1 x R/H SIDE FRAME
3. BENT SUPPORTS
1 x Bent Supports
4. BUCKET SEATS (Pair)
A-3 Stadium Seat (Red)
A-3 Stadium Seat (Blue)
A-3 Stadium Seat (Green)
1 x CROSSBAR & BACK BAR (4M)
1 x CROSSBAR & BACK BAR (5M)
1 x CROSSBAR & BACK BAR (6M)
5. 1 x Backbar
6. 1 x Crossbar
7. 2 x Retaining bar
8. RETAINING TUBES
Retaining Tube
9. PET BACK SHEET
14. M8 Nutcap
15. 32mm Cover Cap (Top)
16. 32mm Cover Cap (Bottom)
17. M8 Hex Nut
18. M8 Nyloc Nut
19. M8 Washer STST
20. M8 Skiffy Washer
21. M8 * 20 Set Screw S/S
22. M8 * 80 Hex Bolt S/S
23. M8 * 40 Hex HD Bolt S/S
24. M8 * 90 Hex Bolt S/S
25. 14G 60mm Self Tapping Screw
26. 16mm Round Insert
27. Crossbar Cap
28. 10G * ½" Self Tapping Screw
29. 10mm T-Handle Nut Driver
IMPORTANT NOTES
At least THREE people are required to safely assemble
this shelter.
This shelter must be assembled on a flat surface.
Failure to do this may result in bolt hole misalignment.
If the shelter is to be bolted into concrete, there should
be at least 100kg of concrete at each anchor point (Eg:
350x350x350mm Cube).
WHEN THE SHELTER IS FULLY ASSEMBLED IT MUST
BE ANCHORED TO PREVENT MOVEMENT AND
TOPPLING. PLEASE SEE YOUR DISTRIBUTOR FOR
ANCHORING OPTIONS.
Pack Contents:
( FEP038)
( FEP037)
10.
( FEP049)
11
(PEQ049)
12.
( FEP045/046)
(PLA049)
(PLA044)
(PLA043)
13. 1 x SEAT SUPPORT
( FEP044)
( FEP041)
( FEP040)
( FEP047)
(PEQ078)
30. Aluminium Team Shelter Sockets
( PLA047)
4m Shelter 5m Shelter
4
3
3
4
39
9
48
4
30
6
3
8
5
2
4
1
General Info
Page 1
1 x SEAT SUPPORT FRAME (4M)
1 x SEAT SUPPORT FRAME (5M)
1 x SEAT SUPPORT FRAME (6M)
Seat Support
. End Support
BACK SUPPORTS (4/6M)
1 x BACK SUPPORTS) (5M)
950mm Back Support
(4M)
1 x SEAT SUPPORT (5M)
1 x SEAT SUPPORT (6M)
1 x BOLTS PACK (4M)
1 x BOLTS PACK (5M)
1 x BOLTS PACK (6M)
(Packed with Seat Support Frames)
6m Shelter
4 4
4 5
4 5
4 4
48 57
12 15
56 64
4 4
36 42
8 10
4 5
10 12
6 7
2 2
4 4
1 1
Please read these assembly instructions
carefully before starting to assemble
your shelter.
TOOLS REQUIRED
1 x T-Handle Nut Driver (included)
1 x Mallet
1 x Rachet with 1 3mm
2 x 13mm Spanners
1 x Phillips HD Screw Driver/Drill Bit
Silicone Lubricant Spray/Fairy Liquid
INS206
Revision 3
16/11/15
© Harrod UK Limited
(FEP053)
(FEP055)
(FEP057)
(PEQ044)
(PEQ052)
(FEP079)
(FEP077)
(PEQ079)
( FEP054)
( FEP058)
( FEP056)
( FPK040)
( FPK041)
( FPK042)
(FEQ794)
Part No.
(CAP951)
(CAP096)
(CAP097)
(BOL400)
(BOL402)
(BOL715)
(BOL722)
(BOL546)
(BOL472)
(BOL520)
(BOL450)
(BOL771)
(CAP095)
(PEP050)
(BOL782)
(FAS005)
socket