Related Manuals for Harrod HOC-130
Summary of Contents for Harrod HOC-130
- Page 1 INS130 Revision 11 15/01/2019 © Harrod UK Limited INSTRUCTIONS FOR FENCE FOLDING HOCKEY GOALS HOC-130 - 2.1M - 2.5M PROJECTION HOC-131 - 2.5M - 3.3M PROJECTION HOC-132 - 3.3M - 4.8M PROJECTION INS130...
- Page 2 PART LISTINGS FOR EACH GOAL TYPE (HOC-130 & 131 => FEP064 x2 – HOC-132 => FEP166 x2 - R/H TOP ADJUSTER ARM) (HOC-130 & 131 => FEP065 x2 – HOC-132 => FEP167 x2 - L/H TOP ADJUSTER ARM) HOC-130 => FEP160 x2 HOC-131 =>...
- Page 3 PART LISTINGS FOR EACH GOAL TYPE (CONT) FEP108 x 2 (Back-board) FEP107 x2 pairs (Side Boards) FEP082 x1 pair (Crossbar) FEP106 x1 FEP311 x1 Locking Fence Top Fence Arm pack of 4 Arm pack of 4 FEP170 x2 pairs (Hockey Goal Front Upright) FEP029 x1 (Net Retaining Bars for Back/side Boards) FEQ863 x4 (Hockey Main Support Posts) FEP164 x4 (Centre Hinge Support Post)
- Page 4 FPK100 - BOLT PACK PART LISTINGS x2 ASY109 ASY110 Front hinge bolt x2 Back hinge bolt x2 PEP093 PEP094 Top hinge bracket Top hinge bracket left hand x1 right hand x1 BOL825 CHAIN 300mm 26 x 4mm x2 BOL102 BOL665 BOL202 HKS012 M12 Nylock...
- Page 5 BOLT PACK PARTS LISTING ASY130 BOL793 x2 BOL791 x1 Allen key 4mm Allen key 6mm SEP497 x8 M10 U BOLT S/S FPK367 CLP050 PACK OF 70 P- CLIP x2 HOOKS OTHER TOOLS NEEDED 2 x 19mm SPANNER (RATCHET OR RING) 2 x 17mm SPANNER (RATCHET OR RING) 1 x FLAT HEAD SCREW DRIVER 1 x SPIRIT LEVEL...
- Page 6 ASSEMBLY & MAINTENANCE INSTRUCTIONS ig holes 600x600 square x 600mm 1: Support Posts - D 3710 deep at the centres of 3710mm as shown in the diagram to the left. Position the Support Posts FEQ863 FEQ863 360mm centrally back from the front of the (court side) of the fence/kick board.
- Page 7 ASSEMBLY & MAINTENANCE INSTRUCTIONS ow remove the channel from the 4: n side boards, as you will need to attach it to FEP164. Unscrew using the 4mm allen keys supplied with the bolt pack. emove channel this end FEP164 onnect FEP164 to the channel that was 5: C Channel from sideboard removed from the hockey side boards with...
- Page 8 ASSEMBLY & MAINTENANCE INSTRUCTIONS SEP497,BOL710, BOL102 BOL121, BOL710 BOL710, BOL102 ou might have NOTE: ith the aid of a second 10: W To sightly adjust the person lift the side frame up and Arms to suit your place into the connecting arms Playing surface) And bolt together using BOL121, BOL710 &...
- Page 9 ASSEMBLY & MAINTENANCE INSTRUCTIONS STEP LADDERS ARE REQUIRED FOR THIS PART OF THE JOB. BOL110, BOL710 BOL710, BOL102 sing a spirit level, level the 13 U goal up on the centre post, then raise the crossbar and upright up and insert the appropriate bolt s into place.
- Page 10 NET FITTING AND TENSIONING. Before Fitting the Net - Make sure two or more people stretch the Net out into shape as much as possible. Due to the stiffness of the material, it may seem to be too tight. By stretching the Net into it’s Box shape will allow easier assembly. nce you have un-rolled the net, find 16: O BOL331 (ALREADY IN PLACE)
Need help?
Do you have a question about the HOC-130 and is the answer not in the manual?
Questions and answers