Harrod FBL-167 Quick Start Manual

Code:
FBL-167
Product:
PVC Futsal Goal
1. PLP115 L/H Corner joint with spigot x1
2. PLP116 R/H Corner joint with spigot x1
3. PLP090 Centre support tube with label x1
4. PLA086 Top upright tube with label x2
5. PLP107 Poly Goal joint tube x8
6. PLA111 Bottom upright & Crossbar joint x4
7. PLA110 Post Corner Joint x2
8. PLA087 Top net support tube x2
9. CLP118 Small button clip x10
10. CLP119 Large button clip x28
11. CLP040 Net Clips x36
IMPORTANT PLEASE READ THE
A S S E M B LY I N S T R U C T I O N S
CAREFULLY BEFORE STARTING
TOASSEMBLE YOUR GOAL
17
7
16
17

Pack Contents:

View of Product
2
18
IF USED ON A SYNTHETIC PITCH, THE GOALS MUST BE SUITABLY ANCHORED
TO CONFORM TO BS 8462-1:2005. THIS CAN BE ACHIEVED BY EITHER,
A) INSTALLING A GROUND ANCHOR BELOW THE SYNTHETIC GRASS LEVEL
B)BY ATTACHING THE GOAL TO THE NEAREST PERIMETER FIXING POINT, A
CHAIN OR FLAT BAR CAN BE USED TO ACHIEVE THIS, BUT CARE SHOULD BE
TAKEN SO AS TO NOT CREATE ANOTHER POTENTIAL HAZARD WHEN
INSTALLING THIS OPTION.
C)ATTACHING COUNTERBALANCE WEIGHTS (35
ANCHORS) TO THE BACK OF EACH GOAL.
PLEASE CONTACT YOUR DISTRIBUTOR FOR ADVICE ON ATTACHMENT OPTIONS.
12. PLA107 Net support connector x2
13. PLA088 Back net Support tube x4
14. PLA126 Net support connector x2
15. PLA125 Bottom Corner connector x2
16. PLP091 Bottom Sidebar tube with hole x2
17. PLA089 Bottom /Side bar tube with label x4
18. PLP121 Bottom centre connector tube x1
19. PEG020 U-Peg x4
20. FBL-155 Carry Bag x1 (Not Shown)
21. FBL-156 Futsal net x 1 (Not Shown)
12
13
14
13
3
Important: Plastic Goals
exposed to sub zero temperatures, store inside
during cold weather - Failure to do so may
result in goal damage.
02/02/2016 Revision 8
©
11
8
1
4
6
5
6
15
19
MUST NOT
kg IN TOTAL OR 2 X ANC-005
INS715
Harrod UK Limited
10
9
be