Advertisement
MAINTENANCE
ENGINE CUM TRANSMISSION OIL
Check the engine cum transmission oil level
periodically. A gauge for checking the oil level is
provided at the right-hand side crankcase cover.
1. The check must be performed when engine is in
cold condition, after placing the motorcycle in
center stand with front wheel touching the
ground.
2. Place the motorcycle in an upright position on a
horizontal and firm surface.
3. Wipe-off the surroundings of gauge oil level.
4. Remove gauge oil level and wipe it clean.
5. Reassemble the gauge oil level and completely
screw it in.
6. Once again remove the gauge and check the oil
level.
Maximum
Minimum
7. The oil level should be between the minimum and
maximum level marks on the gauge as shown in
the figure.
8. If the oil level is below the minimum level, top up
with
TVS TRU4 FULLY SYNTHETIC oil (SAE 10W 30
upto the maximum level mark.
API-SL, JASO MA2)
Do not overfill.
9. Wipe out the oil traces with a clean cloth to
prevent dust accumulation and re-fix the gauge.
Caution
Do not run the vehicle with insufficient / without
engine cum transmission oil as it will cause serious
damage to the engine components.
Excessive oil filling will cause oil leak and other
malfunctions. Always use TVS TRU4 FULLY
SYNTHETIC oil
only (SAE 10W 30 API-SL, JASO MA2).
Make sure that no foreign object gets in the crankcase
while topping up the engine oil.
Warning
Correctly recycle or dispose the used engine oil in
order to avoid environmental pollution.
69
Hide quick links:
Advertisement
