Atlas Copco G 160 VSD Original Instruction Book page 57

Instruction book
Protection during transport
Step
1
2
3
Electric cabinet
Step
1
2
3
APF221384
Transport fixtures
Action
The coupling housing supports, motor support and air receiver supports are secured to
the frame, immobilizing the vibration dampers during transport.
Remove the bushes (1) from the gear casing supports and the motor support.
Remove the brackets fitted next to the air receiver supports.
Action
Check that the electrical connections correspond to the local codes. The installation
must be earthed and protected by fuses in all phases. An isolating switch must be fitted.
Check the wires on the transformers for correct connection.
Check the setting of the circuit breakers (see the section Settings of circuit breakers).
55