Atlas Copco G 160 VSD Original Instruction Book page 33

Instruction book
Topic
Week Action Schemes
Week Cycle
Status
Remaining Running
Time
INFORMATION
Topic
www.atlascopco.com
More
TEST
Topic
Regreasing Test
Safety Valve Test
COUNTERS
Topic
Running hours
Loaded Hours
Motor Starts
Load Relay
Fast Starts
VSD 1 — 20 % RPM
VSD 20 — 40 % RPM
VSD 40 — 60 % RPM
VSD 60 — 80 % RPM
VSD 80 — 100 % RPM
Accumulated air volume
Module Hours
Direct stops
APF221384
Description
Displays 4 programmable week action schemes
Each week action scheme contains 7 programmable days and these days can
contain a number of successive events on selected time slots.
Contains 10 weeks and each week can be selected as 1 of the 4 week action
schemes
Displays the status (On/Off) of the week timer functionality
Allows to set a timer to keep the compressor running for 1-240 minutes
Description
Refers to the company website where more detailed info on the product can be
found
The More button displays the software versions, addresses, licenses, ...
Description
Allows to run the motor regreasing program
Allows a functionality check of the safety valve. (This feature can only be
enabled by a service technician.)
Description
Displays the number of hours the compressor has been running in unloaded &
loaded mode
Displays the number of hours the compressor has been running in loaded mode
Displays the number of motor starts
Displays the number of load relay toggles (thus unload/load transitions)
Displays the number of manual motor starts that exceed the automatic motor
starts
Displays the number of hours the compressor has been running between 1 %
and 20 %
Displays the number of hours the compressor has been running between 20 %
and 40 %
Displays the number of hours the compressor has been running between 40 %
and 60 %
Displays the number of hours the compressor has been running between 60 %
and 80 %
Displays the number of hours the compressor has been running between 80 %
and 100 %
Displays the accumulated air volume
Displays the number of hours the module has been powered
Displays the number of compressor stops
31