Selecting The Type Of External Sensor - Biasi RINNOVA ADAPTIVE 25S User Manual And Installation Instructions

glands R (Figure 5.24).
5.15 Selecting the type of external
sensor
The boiler is set to operate without an external
sensor.
If an external sensor (optional) IS CONNECTED
to the boiler, the correct parameter must be set
according to the type of probe installed.
Sequence for setting the type of external sen-
sor
• Enter "programming mode" by pressing the 13
and 15 keys simultaneously for 5 seconds (Fig-
ure 5.25) until HiS (Boiler History) appears on
the LCD display (Figure 5.26).
12
13
Figure 5.25
Figure 5.26
• Scroll through the various menus by pressing
the keys 13 (back) or 15 (forward), until PAr
(Parameters menu) appears on the LCD display
(Figure 5.27).
• Press the 14 key for 1 second to enter the se-
lected menu.
- 50 -
INSTALLATION
17
16
15
14
Figure 5.27
• Scroll through the various parameters by press-
ing the keys 13 (back) or 15 (forward), until P57,
which alternates with the parameter value, ap-
pears on the LCD display (Figure 5.28).
Figure 5.28
• Press the 14 key for 1 second (Figure 5.25) to
enter the selected parameter. The display will
show the following (Figure 5.29).
Figure 5.29
• Use keys 13 or 15 to modify the value of param-
eter 57 according to the type of probe installed
(Figure 5.30).