Removing The Body Panels - Biasi RINNOVA ADAPTIVE 25S User Manual And Installation Instructions

Figure 9.4
• Press the 14 key for 1 second (Figure 5.49)
to enter the selected parameter. The display
will show the following (Figure 9.5).
Figure 9.5
• The value of parameter 34 can be changed
from 00 to 48 months, using the 13 or 15
keys. It is possible to set parameter 35 to 99
thereby disabling the maintenance request
A
(symbol will disappear from the display).
• Press button 14 (Figure 9.1) to confirm the
value entered. The display will show the fol-
lowing (Figure 9.6) for 5 seconds, then move
up to the next level.
Figure 9.6
MAINTENANCE
To exit the parameters menu:
• wait 15 minutes without pressing any key;
• switch off the electric power supply;
• press the 13 and 15 keys simultaneously for
5 seconds (Figure 9.1) (return to previous
level).

9.3 Removing the body panels

Front panel
• Unscrew the screws A and remove the front
panel D by pulling it towards you and then
pushing it upwards in order to free it from
the upper seats (Figure 9.7 and Figure 9.8).
Side panels
Loosen the screws B, C, G and H in Figure 9.7
and remove the two side panels E and F push
them outwards.
Figure 9.7
A
B
C
- 67 -