Introduction - Refco TAP Installation And Operating Manual

All manuals and user guides at all-guides.com
English Instruction Manual TAP / Temperature And Pressure Gauge

Introduction

Thank you for your purchase of the REFCO TAP, Temperature And
Pressure gauge.
The REFCO TAP wireless digital pressure and temperature gauge is a
user friendly instrument to measure temperature and pressure from
the low and high sides of air conditioning and refrigeration systems.
Features:
- Quick and easy connection to pressure source and temperature
measuring point.
- The wireless K-type temperature clamp, equipped with digital
display, is applicable for pipe diameters 6 mm to 42 mm
(1/4" to 1-5/8").
- Measurements and calculation of superheat or subcooling can be
shown on pressure gauge display and / or on your mobile device.
- Up to 6 TAP devices can be monitored on your mobile device.
- Create report and send by e-mail to your office.
- Uses common AAA batteries.
- TAP is available in a suitable case either as single or double set.
4
Instruction Manual TAP / Te
CE/FCC Conform
CE/FCC Notice
CE:
This device meets the no
FCC:
This device meets the re
FCC. Operation occurs un
(1). This device does n
reception
(2). This device must tole
diation which could resul
Note: The grantee is not
tions not expressly appro
ce. Such modifications co
equipment.
Note: This equipment has
limits for a Class B digit
Rules. These limits are
against harmful interfere
ment generates, uses an
not installed and used in a
harmful interference to ra
However, there is no gua
particular installation. If
rence to radio or televisi
turning the equipment o
correct the interference b
- Reorient or relocate th
- Increase the separation
- Connect the equipmen
that to which the recei
- Consult the dealer or a
The device has been eval
ment. The device can be
restriction.