Asus WL-520G User Manual page 19

WL-520g Wireless Router User Manual
First, we are to set up AP1. Choose Bridge in the
1
Wireless folder.
Set the SSID as WL520g and
2
WEP Encryption as None.
We suggest AP1 and AP2
using the same SSID.
3
Select WAN & LAN in the IP Config folder.
Confirm that the IP address
4
of AP1 is 192.168.1.1.
5
Enter the Bridge page again.
Select Hybrid as AP mode.
6
Thus, AP1 will be both AP
and WDS. If you want to use
wireless function only, please
choose WDS Only.
When you choose WDS or Hybrid mode, you will see
7
a message demanding a fixed channel for WDS.
Select a fixed channel for
8
WDS. In this example, we set
it as Channel 3.
18