Fill your DDNS account data
in the DDNS Setting page of
Click Save & Restart.
Now we are to verify whether DDNS is
working. Click Start menu and select Run...
Type in cmd and click OK to open the
Type ping wl520g.dyndns.
org (your host name). If reply
information is displayed, the
DDNS is working correctly.
6) Setting up WDS
Wireless bridge, also known as Wireless Distribution System or WDS, allows
connection to one or more access points. We now take an example to show how
to setup WDS for two APs. In this example, AP1, with MAC address of 00:0E:A6:
A1:3F:6E and IP address of 192.168.1.1, will operate in "Hybrid" mode; AP2, with
MAC address of 00:0E:A6:A1:3F:87 and IP address of 192.168.1.2, will also be set
to "Hybrid" mode, but it would not assign IP addresses to clients. Only one DHCP
server in the WDS system is allowed, that is AP1 in this example.
LAN IP Address
WL-520g Wireless Router User Manual
Access Point A
Access Point B