NRS Healthcare P94367 User Instructions

P94367
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in
a safe place for future reference.
1.

INTENDED USE

The Community Bed Grab Rail MK2 provides stable support to aid adult users (taller than 1.46m) transfer
in and out of bed, moving from a lying to a sitting position as well as assist user repositioning.
This product is designed for use with profi ling metal framed community beds with 50mm x 25mm (2" x 1")
rectangular side tubes.
This product may be compatible with beds fi tted with side rails subject to a suitable risk assessment.
2.

SAFETY

318mm
Min
WARNING: To avoid possible entrapment, you
must always position the product a minimum of
318mm from the headboard or footboard.
WARNING: To avoid possible entrapment, you
must always position the product a minimum
of 318mm from solid objects/furniture such as
bedside drawers or cabinets.
WARNING: To prevent hand entrapment do not
hold the grab rail when altering the profi le of the
bed.
WARNING: Take care on beds with rising
backrests. In some cases, when the backrest
raises the gap between the grab rail and the bed
could become less than 25mm (1").
WARNING: The maximum user weight must not be
more than 160Kg (25st).
YOU MUST carry out a risk assessment to assess
the use and suitability of the bed rail in relation to
the users physical and cognitive ability, as well as
the surrounding environment (including any fi tted
accessories such as side rails and cot bumpers).
DO NOT install this product to a damaged bed.
ALWAYS check the profi ling operation of the bed
with the grab rail already fi xed in position, for any
potential risks prior to use.
NRS COMMUNITY BED GRAB RAIL MK2
NRS Community Bed Grab Rail MK2
USER INSTRUCTIONS
3.

UNPACKING

Remove the packaging and check all parts
carefully. Contact your supplier immediately if parts
are missing or damaged and do not try to install.
4.

INSTALLATION

4.1 Install the Grab Rail:
The grab rail is supplied fully assembled and only
requires fi xing to the bed frame.
Loosen both hand-wheels fully to enable the fi xing
bracket to fi t over the bed frame.
Hook the grab rail over the bed frame.
Note: Do not fully tighten the hand-wheels until the
grab rail has been positioned.
1
Maximum User Weight
25st
160kg