Appendix F Messages Of Hard Disk And Disk Configuration Status - QNAP Disk On-line Server NAS-2100 User Manual

Appendix F
Configuration Status
Status Description for Hard Disk and Disk Configuration
Hard Disk
English Display
Ready
No disk
Invalid
R/W error
Disk Configuration/ RAID Configuration
English Display
Initializing
Formatting
Creating
Removing
Rebuilding
Checking
English Display
Ready
Unmounted
Not Active
Uninitialized
Messages of Hard Disk and Disk
The hard disk status is normal
No disk currently
Disk tray is not installed or there is main board error.
Users can check disk tray. If there is main board
error, please contact QNAP customer service.
Indicates the disk does not have a record on NAS
The disk is used on NAS the first time, or the disk on
the same NAS model is used. Users can re-configure
disk volume.
Disk fails
When R/W error is shown, users should back up data
immediately and replace the failed disk.
Initializing disk
Formatting disk
Creating RAID configuration
Removing RAID configuration
Rebuilding RAID configuration
Error checking on hard disk or disk configuration in
process
NAS will check disk automatically if it is shut down
improperly
The status of current disk or disk configuration is normal
Hard disk is not installed or hard disk configuration is
not configured
RAID configuration is damaged and cannot be enabled
When this message is shown, users should back up
disk data immediately and replace the failed disk.
Initialization fails
Single disk does not support hot swap. If the hard
disk is unplugged when NAS is turning on, disk
configuration will be damaged and will lead to data
loss.
111
Status Description
Status Description
Status Description