Conforming Standards; Cable Lengths And Cross-Sections; Acoustic Noise - Danfoss VLT CDS 803 Operating Manual

Compressor drive 6–30 kw
Hide thumbs Also See for VLT CDS 803:
Table of Contents

Advertisement

VLT® Compressor Drive CDS 803
Operating Guide
Derating for high altitude, see
sure and High
Altitudes.
Refer to
3.1 Mechanical
Installation.
1

6.6 Conforming Standards

Safety standards
EMC standards, Emission
EMC standards, Immunity
Energy efficiency class
(1)
Determined according to EN 50598-2 at:
1
Rated load.
90% rated frequency.
Switching frequency factory setting.
Switching pattern factory setting.
For power loss data according to EN 50598-2, refer to Danfoss
The VLT® Compressor Drive CDS 803 with SXXX in the type code is certified against UL 508C. Example:
CDS803P7K5T4E20H4XXCXXXSXXXXAXBXCXXXXDX
The VLT® Compressor Drive CDS 803 with S096 in the type code is certified against UL/EN/IEC 60730-1. Example:
CDS803P30KT4E20H2XXXXXXS096XAXBXCXXXXDX

6.7 Cable Lengths and Cross-sections

Maximum compressor cable length, shielded/armored (EMC-cor-
rect installation)
Maximum compressor cable length, unshielded/unarmoured
Maximum cross-section to compressor, mains
Cross-section DC terminals for filter feedback on enclosure size
H3
Cross-section DC terminals for filter feedback on enclosure sizes
H4–H6
Maximum cross-section to control terminals, rigid wire
Maximum cross-section to control terminals, flexible wire
Minimum cross-section to control terminals

6.8 Acoustic Noise

Acoustic noise from the drives comes from 3 sources:
DC-link coils
Integral fan
RFI filter inductor
Danfoss A/S © 2021.06
3.1.2.2 Derating for Low Air Pres-
N O T I C E
EN/IEC 61800-5-1, UL 508C, EN/IEC/UL 60730-1
EN 61800-3, EN 61000-6-3/4, EN 55011, IEC 61800-3
EN 61800-3, EN 61000-3-12, EN 61000-6-1/2, EN 61000-4-2, EN
61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
MyDrive® ecoSmart
website.
See EMC Emission Test Results in the VLT® Compressor Drive De-
sign Guide listed in
Specifications
1.2 Additional
See
6.1 Electrical Data
for more information
4 mm
16 mm
2.5 mm
2.5 mm
0.05 mm
AQ321748767627en-000301 / 130R0570 | 37
IE2
Resources.
50 m (164 ft)
2
/11 AWG
2
/6 AWG
2
/14 AWG
2
/14 AWG
2
/30 AWG

Advertisement

Table of Contents
loading

Table of Contents