Gas Analyzer Preparation - EMS 5001 Operator's Manual

Getting started is simple. Figure 5 shows the items you should have received in the
shipping container. Note: This description applies to the Model 5001 analyzer with a
display, see Page 13 for instructions on setting up a Model 8000 bluetooth wireless
analyzer. The first step is assembling the sample hose. Once the sample hose is assembled,
connect the hose to the sample hose fitting on the back of the analyzer.
The next step is providing power to the analyzer. The analyzer should be connected to
a 12v DC power source. You have several options:
1. Cigarette Lighter Connection - Figure 6
2. Cigarette lighter to battery connection with adapter - Figure 7
3. AC to DC Power Supply - Figure 8 EMS-5256
Figure 6
The Power LED in the lower left corner of the display will light once voltage is applied.

Gas Analyzer Preparation

Figure 7
Figure 5
7
Figure 8