Flow (Temperature) Setting - SMC Networks PF3W7 Series Operation Manual

Flow (Temperature) Setting

Measurement mode
The condition where the flow is detected and displayed, and the switch function is operating.
This is the basic operating mode; other modes should be selected for set-point and other function setting
changes.
Set ON and OFF points of the Flow switch.
Switch operation
When the flow exceeds the set value, the Flow switch will be turned on.
When the flow falls below the set value by the amount of hysteresis or more, the Flow switch will be turned
off.
If the operation shown below does not cause any problem, keep this setting.
-19-
No.PF##-OMM0005