6.5
OIL CARTRIDGE OPENING
Place half-shells on the oil cartridge.
1
Squeeze them moderately on the cartridge thanks to the vise block.
CAUTION
Take care to the position of the half-shells on the cartridge before squeezing.
Unscrew and remove the compression block.
2
Take the cartridge off the vise block.
Turn around the cartridge and place the half-shells on the shaft.
3
Squeeze them moderately thanks to the vise block.
CAUTION
Take care to the position of the half-shells on the cartridge before squeezing.
SM_150707_A
Tool(s) required :
-
Half shell Ø21 / ref. 150707-O-060
-
Vise block
Tool(s) required :
-
24mm open end wrench
Tool(s) required :
-
Half shell Ø10 / ref. 150707-O-058
-
Vise block
Service Manual IDYLLE since year 2014
1
2
39