Slide Bushings Replacement - BOS Suspension IDYLLE 2014 Service Manual

6.3

SLIDE BUSHINGS REPLACEMENT

Place the fork on the vise block.
1
Rotate the fork at 45° in front of you.
Take the slide bushing extractor tool.
2
This tool is used for all Idylle models. Locate the right side (36 / 37mm).
Unscrew the middle nut to push it away from the DEVILLE side.
Place the aluminum brace on the tool.
Place the washer parallel to the ground.
3
Push the tool inside the casting until the washer is under the lower bushing.
Once the washer is located under the lower bushing, pull back on the tool.
The washer will then be locked under the lower bushing.
Keep traction on the tool while screwing the nut until it touch the tool.
SM_150707_A
Tool(s) required :
- BOS suspension vise block / ref. 151108-O-021A
Tool(s) required :
- BOS slide bushing extractor / ref. 150707-SEO-003
Tool(s) required :
- BOS slide bushing extractor / ref. 150707-SE-003A
Service Manual IDYLLE since year 2014
1
2
1
2
26