Disassemble - BOS Suspension IDYLLE 2014 Service Manual

6.2

DISASSEMBLE

Unscrew the 4x screws from axle wheel.
1
Remove the wheel axle.
Clean the quick release system and wheel axle.
Use sand paper to remove rust on the wheel axle if necessary.
Place the fork on the vise block thanks to the specific tool.
2
Tighten the screws to hold the fork on the vise block.
CAUTION
Loosen the air valve cap.
3
Clean it.
Store it.
SM_150707_A
Tool(s) required :
- 4mm HEX wrench
- 6mm HEX wrench
- 600 sand paper
Tool(s) required :
- BOS suspension vise block / ref. 151108-O-021A
- 4mm HEX wrench
Tool(s) required :
- n/a (by hand)
Service Manual IDYLLE since year 2014
1
2
1
2
13