Reassemble - BOS Suspension IDYLLE 2014 Service Manual

6.4

REASSEMBLE

Degrease the scraper seal groove on the casting.
1
Use isopropyl alcohol and rag to clean the groove.
CAUTION
Greasy surface will generate scraper seal extraction while riding!
Remove the spring from the scraper seals.
2
Take the upper slide bushing tool and apply the scraper seal tool & the strike tip.
Place a new scraper seal on the tool and apply the tool on the casting.
Hit the tool until the scraper seal has touched all around the casting.
Repeat operations for the other scraper seal.
CAUTION
Do not squeeze the scraper seal, stop hitting once it touch the casting.
Apply universal grease on the inside of the scraper seal.
3
Remove excess of grease.
SM_150707_A
Tool(s) required :
- Spray of isopropyl alcohol
- Rag
Tool(s) required :
- BOS lower slide bushing tool / ref. 151108-O-007C
- BOS scraper seal tool / ref. 151108-O-009C
- Rubber mallet
Tool(s) required :
- Universal grease
- Teflon brush
Service Manual IDYLLE since year 2014
1
2
1 2
3 4
1
2
30