Table of Contents
Advertisement
EXPLODED VIEW
CLEANING
Clean your fork with a washing machine if you have one
available.
Otherwise, use the high pressure cleaner and finish cleaning
with hot water and soap.
Required tools :
- Washing machine
- Soap
DISASSEMBLY
Before disassembly, be sure to record your
compression 2 (Figure A) /Rebound 1 (Figure
B) se�ngs in a notebook.
To do this, count the number of clicks to the
fully closed posi�on. Once you have noted the
se�ng, unscrew your se�ngs all the way
down for opera�ons on your fork. Also set the
lever to the so� posi�on.
AIR CARTRIDGE DISASSEMBLY
1
Unscrew the air cartridge top cap
•
Then remove the Schrader valve so
•
that all air is removed from the
cartridge
6
Absolutely prohibited: any aggressive product
such as degreaser on joints and spherical
bearing. If you use a high-pressure washer, never
direct the jet directly onto the joints. Regularly
remove any soil that may accumulate in the
rubber stop.
A
B
2
nscrew the cartridge bleed
• Slowly u
screw and allow the air to escape
before replacing it
Unscrew then the air cartridge
•
2.5mm allen key
34mm socket
7
Advertisement
Table of Contents
