Energizer ENA548 Owner's Manual page 15

PROBLEM: AC product will not operate, RED FAULT
light ON.
Possible cause
AC product(s) connected
are rated at more than the
inverter's continuous
power rating; overload
shutdown has occurred.
AC product is rated less
than the inverter's
continuous power rating;
high starting surge has
caused overload
shutdown
The inverter has over
heated due to poor
ventilation and has shut
down
Solution
Use a product with a power
rating less than the inverter's
continuous power rating.
Product exceeds inverter's surge
capability. Use a product with
starting surge power within the
inverter's capability.
Unplug inverter from DC socket
and allow to cool for 15 minutes.
Remove objects covering unit.
Move the inverter to a cooler
location. Reduce continuous
load operation. Restart.
14