Table of Contents
Advertisement
OPERATION
1.
Install the button battery into the handle battery compartment.
2.
Plug in the appliance to a grounded wall outlet.
3.
Press the power switch. The indicator lights will turn red, indicating preheating. If
the lights do not turn on, please check the Troubleshooting section at the back of
this user guide for more details.
4.
The appliance warm-up time is 25 seconds. When preheating is complete, the
indicator light will turn to be blue, and the appliance will be ready for use.
Notes:
If a power failure occurs in the middle of the warm-up, or power-off occurs after the
warm-up is complete, turn the power supply on again. Depending on the time
between power off and on, the appliance may repeat the above warm-up operation.
•
Continuous steam output (up to 5 minutes continuously working, the steam
averaged): about 16-26g / min.
•
Steam output time: About 10-20 minutes.
Button battery installation
Advertisement
Table of Contents
