Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kogan KAMOPSTM03U
Summary of Contents for Kogan KAMOPSTM03U
- Page 1 3-IN-1 UV STEAM MOP KAMOPSTM03U...
-
Page 2: Table Of Contents
Safety & Warnings Components Overview Assembly Filling the Water Tank Operation Functions Cleaning & Care Specifications Troubleshooting... -
Page 3: Safety & Warnings
SAFETY & WARNINGS Warning: Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Warning: When using electrical appliances, basics safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage. - Page 4 • If the circuit breaker activates while using the steam function, cease use immediately and contact help.Kogan.com for support (beware of the risk of electrical shock). • The appliance emits extremely hot steam to sanitize the area of use. This means that the steam head and cleaning pads get extremely hot during use.
- Page 5 Residual risks: Additional residual risks may arise when using the appliance which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use, etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided.
-
Page 6: Components
COMPONENTS A Handle B Upper Tube C Lower Tube D Steam Unit E Mop Head F Microfibre Pad G Carpet Glider H Measuring I Cleaning Needle... -
Page 7: Overview
OVERVIEW Handle Water tank button Cord holder Water tank Upper tube Power cord Lower tube Steam Unit Power switch Mop head Spindle Water tank cap... -
Page 8: Assembly
ASSEMBLY Notes: Each steam mop is 100% tested in the factory to ensure product performance and safety. When assembling your new steam mop for the first time you may notice water residue inside of the unit. Attaching the handle • Insert the handle into the upper tube until it clicks into place. - Page 9 Attaching the steam head • Slide the bottom end of steam unit into the mop head spindle until it clicks into place. • The mop head can be removed from the steam unit by pressing the salient point on the mop head spindle. Attaching a cleaning pad •...
-
Page 10: Filling The Water Tank
FILLING THE WATER TANK Method one Open the water tank cap, use the measuring cup to fill with 330mL of water, then close the water tank cap. Method two Remove the water tank from main body, open the water tank cap, and fill the water tank from water faucet. -
Page 11: Operation
OPERATION Plug in the appliance to a grounded power outlet. Press the power switch. The indicator lights will turn red, indicating preheating. If the lights do not turn on, please check the Troubleshooting section at the back of this user guide for more details. The appliance warm-up time is 30 seconds. -
Page 12: Functions
CLEANING & CARE WARNING: Do not immerse the appliance in water. Ensure that the product is powered off and unplugged before cleaning the appliance. Empty the water tank after use every time and clean the water tank. How to decalcify the water tank interior To clean calcium deposits that builds up inside the water tank, add one or two tablespoons of white vinegar to water tank and then shake the contents. - Page 13 By using cleaning solution Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank. Secure and position the unit to ensure steam released is aimed away from the floor or surrounding objects and surface. Plug the unit in, turn the unit ON by pressing the power switch and allow the unit to produce steam unit the vinegar/water solution in used up.
-
Page 14: Specifications
Storage • After the steamer is used, turn power off and then unplug the power cord. • Take out the water tank and empty the residual water in the tank and clean the external surface with a dry cloth. Until the steam mop cools down, clean appliances. -
Page 15: Troubleshooting
TROUBLESHOOTING Use troubleshooting guide as a first step to resolve any problems you may be experiencing. All servicing should be done by an authorised service representative. WARNING: o reduce risk of personal injury-unplug steamer before servicing and allow to cool Problem Possible reason Possible solution... - Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...