Table of Contents
Advertisement
¡ Observe the information about de-
tergents and care products
→ Page 35.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 19
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.9 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press
.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a If you start a programme with act-
ive oxygen, the drum lights up
after the programme starts and the
mist that is created can be seen.
13.10 Adding laundry
Notes
¡ Observe the information on safety
→ Page 4 and preventing material
damage → Page 11.
¡ If you a start a programme with
active oxygen, you cannot add any
laundry after the programme has
started.
Press
.
1.
The appliance pauses.
appears, it is not pos-
Note: If
sible to add laundry.
When
goes out, it is possible to
add laundry.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press
.
5.
13.11 Cancelling the pro-
gramme
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
Press
.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Sköljning programme.
– If the water level is high, start
the Centrif. programme or se-
lect a suitable programme for
draining.
→ "Programmes", Page 25
Remove the laundry → Page 39.
3.
13.12 Unloading the laundry
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
Open the appliance door.
1.
Remove the laundry.
2.
13.13 Switching off the appli-
ance
Press
.
1.
Turn off the tap.
2.
Basic operation en
39
Advertisement
Table of Contents
