Table of Contents
Advertisement
Example of a manufacturer's
instructions for detergent
Soiling
Water hardness: Soft/medium 40 ml
Water hardness: Hard/very
hard
The dosages can be found on the
manufacturer's packaging.
¡ Adjust the dosage to the actual
load.
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 13
Press
.
▶
The switch-on process takes a few
seconds.
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 25
If necessary, adjust the pro-
2.
gramme settings → Page 37.
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 37
These example values refer to a
standard load of 4–5 kg.
Light
55 ml
Adjust the programme settings.
▶
→ "Buttons", Page 23
Observe the information about op-
erating logic.
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Saving the programme
You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme has been set.
¡ The programme settings have
been adjusted.
Press and hold
▶
seconds.
Press
gramme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Notes
¡ Observe the information on safety
→ Page 4 and preventing material
damage → Page 11.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 25.
Requirement: The laundry is pre-
pared.
→ "Laundry", Page 34
Open the door.
1.
Basic operation en
Normal
55 ml
80 ml
settings
for approx. 3
to call up the saved pro-
Heavy
80 ml
105 ml
37
Advertisement
Table of Contents
