Table of Contents
Advertisement
en Basic operation
13.8 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 30
Press
Start / Reload.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "End".
13.9 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press
Start / Reload.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Start / Reload.
5.
13.10 Cancelling the pro-
gramme
Press
Start / Reload.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse شطف
32
programme.
– If the water level is high, start
the
Spin عصرprogramme or
select a suitable programme for
draining.
→ "Programmes", Page 25
Remove the laundry.
3.
→ "Unloading the laundry",
Page 32
13.11 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.12 Switching off the appli-
ance
Turn the programme selector to
1.
Off / . إيقاف
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.
Advertisement
Table of Contents
