Table of Contents
Advertisement
en Installation and connection
When connecting to a 21 mm = ½"
3.
tap, first fit the adapter with a seal-
ing washer.
Open the water tap carefully and
4.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Siphon
16
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Sink
Plastic pipe with
rubber sleeve or
gully
4.6 Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 11.
Loosen the lock nuts using a WAF
1.
17 wrench by turning it in a clock-
wise direction.
Fix and secure
the water outlet
hose with an el-
bow
→ Page 33.
Fix and secure
the water outlet
hose with an el-
bow
→ Page 33.
Advertisement
Table of Contents
