Table of Contents
Advertisement
en Cleaning and servicing
Loosen the hose clamp and care-
3.
fully remove the water outlet hose.
Residual water may leak out.
Clean the water outlet hose and si-
4.
phon connecting piece.
Reattach the water outlet hose and
5.
secure the connection point using
the hose clamp.
46
16.7 Clean the water inlet fil-
ters.
Emptying the water inlet hose
Turn off the tap.
1.
Set a programme, except for
2.
Sköljning, Centrif. or a draining
programme.
Start the programme and leave it
3.
to run for approx. 40 seconds.
Switch off the appliance.
4.
Disconnect the appliance's mains
5.
plug from the power supply.
Cleaning the filter on the tap
Note: Please read the information in
the sections on Safety → Page 4 and
Preventing material damage
→ Page 11.
Requirement: The water inlet hose is
empty.
Remove the water inlet hose from
1.
the tap.
Advertisement
Table of Contents
