Care And Maintenance; Rear Panel (Pre-Filter); Routine Maintenance; On-Demand Maintenance - Sharp FU-E30A-W Operation Manual

Hide thumbs

Table of Contents

CARE AND

MAINTENANCE

REAR PANEL (PRE-FILTER)

The indicator light is lit when it is time to maintain the rear panel (pre-filter).

The indicator light

●

will be lit in one

month if the unit

works 24 hours a

day.

ROUTINE MAINTENANCE

Service the

●

filter while it is

mounted.

Rear Panel (Pre-Filter)

ON-DEMAND MAINTENANCE

Rear Panel (Pre-Filter)

Immerse the pre filter into a

●

solution of kitchen-purpose

synthetic detergents for 10

minutes.

Rinse the detergent off the

●

pre filter with clean water.

Dry the pre filter in the

●

shade.

After maintenance, insert the

power plug.

When the unit starts to run,

FILTER

press and hold the

RESET button for 3

seconds or longer

PRESS 3 SEC.

until the indicator light is off.

After maintenance, press and hold the FILTER RESET button for 3 seconds or longer to reset

●

the operation time even if the indicator light is not lit.

E - 12

警告

Before maintenance, be sure to shut

down the unit and remove its power plug.

[Otherwise, electric shock or injury may

be caused.]

Once a month

rear panel (pre-filter)

Service the

to remove the dust

Use a vacuum cleaner

Be careful not to apply too much force

●

NOTE

to the filter.

Beep

MAIN UNIT

Never wash

the main unit

with water.

Do not use the following articles:

Unplug

(Otherwise, surface scratch and internal liquid leakage may

cause malfunction.)

If there are stubborn stains,

●

Thinner

wipe them off with a cloth

Volatile oil

moistened with water or warm

Petrol and alcohol

water (below 40℃).

2-IN-1 HEPA & DEFORMALDEHYDE FILTER

Clean the 2-in-1 HEPA & Deformaldehyde Filter.

Never wash the filter with water.

2-in-1 HEPA &

(Otherwise, the performance of the filter may be degraded.)

Deformaldehyde

Filter

Gently absorb the dust

Only clean the side marked with OUTSIDE on

●

Clean

the frame. Do not clean the side marked with

carefully

INSIDE on the frame of the filter.

(Otherwise, the performance of the filter may be

degraded.)

Remove the smelling dust on the filter.

●

Do not apply too much force because the filter

Put a piece of paper

●

under the filter to avoid

may be damaged easily.

staining the

surrounding area.

To keep the unit clean and

maintain its long lifetime,

we recommend regular