Table of Contents
Advertisement
FPC 8084 User s Manual
A.2.6 PNP/PCI Configuration
This section describes the PCI bus system configuration. PCI or
Personal Computer Interconnect is a system which allows I/O devices
to operate at speeds nearing the speed of the CPU when
communicating with its own special components. This section covers
some very technical items, and it is strongly recommended that only
experienced users should make changes to the default settings.
Phoe nix – Award BIOS CMOS Setup Utility
PNP OS Installed
Reset Configuration Data
Resources Controlled By
X IRQ Resources
X DMA Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
Ç ÈÆÅ : M ov e
Ente r: Select
F5: Previ ous V alue s F 6: F ail-Safe Defa ults F7 : Opti mized Defa ults
PNP OS Installed
This item is to determine install PnP OS or not. The options available are
Yes and No.
Reset Configuration Data
Normally, this field is
System Configuration Data (ESCD). W hen exiting Setup or installed a
new add-on, the system reconfiguration has caused such a serious
conflict that the operating system cannot boot. The options available are
Enabled and Disabled.
56
PnP/PCI Configurations
No
Disabled
Manual
Press Enter
Press Enter
Disabled
Enabled
Enabled
+/-/P U/PD: Va lue
Gene ral Help
Disabled . Select
Enabled
Item Help
Menu Level f
Select Yes if you are
using a Plug and play
capable operating
system select No if
you need the BIOS to
configure non-boot
devices
F10: Save
ES C: Exit F 1:
to reset Extended
Advertisement
Table of Contents
