Table of Contents
Advertisement
FPC 8084 User s Manual
Typematic Rate (Chars/Sec)
This option refers to the number of characters the keyboard can type per
second.
The default value is 6 .
10
12
15
20
24
30
Typematic Delay (Msec)
This option sets the display time interval from the first to the second
character when holding a key.
Security Option
This item limits the access to the system and Setup, or just to Setup.
The default value is Setup .
The s yste m will no t boot and access to Setup will b e denied if th ein
System
correct p ass wo rd is en tered at th e pr ompt.
The s yste m will boot, but acces s to Setup will be deni ed if the
Setup
co rrect pass word is not ente re d at th e pr om pt.
NOTE:
To disable security, select PASSWORD SETTING at
Main Menu and then password is asked to enter. Do
not type anything, just press <Enter> and it will
disable security. Once the security is disabled, the
system will boot and you can enter Setup freely.
OS Select for DRAM > 64MB
This segment is specifically created for OS/2 when DRAM is larger than
64MB. If the operating system is OS/2 and DRAM used is larger the
64MB, "OS 2" has to be selected; otherwise (under non-OS2), default is
"NON-OS2".
44
6
6 ch aracte rs pe r second
8
8 ch aracte rs pe r second
10 characte rs p er second
12 characte rs p er second
15 characte rs p er second
20 characte rs p er second
24 characte rs p er second
30 characte rs p er second
The default value is 250 .
250
250 msec
500
500 msec
750
750 msec
1000
1000 ms ec
Advertisement
Table of Contents
