FPC 8084 User s Manual
The RS-422/485 pin assignments for COM2 are listed below.
Pin #
1
2
3
4
5
6
7
8
9
10
2.5
VGA
The FPC 8084 has an analog RGB interface connector. It is able to
connect to an expansion CRT monitor, and the system can display on
both the flat panel and the CRT simultaneously.
2.6
Ethernet
Ethernet PJ-45 Connector: LAN1
The FPC 8084 is equipped with a high performance Plug and Play
Ethernet interface which is fully compliant with the IEEE 802.3
standard, and consisting of a RJ-45 connector LAN
3
4.15.1 Pin Assignment
.
LAN1: RJ-45 Connector Pin Assignment
Pin
1
Tx+ (Data transmission positive
Tx- (Data transmissionnegative)
2
3
Rx+(Data reception positive)
20
Signa l Name
R2-422
TX-
No connector
No connector
TX+
No connector
No connector
RX+
No connector
No connector
No connector
RX-
No connector
No connector
No connector
GND
No connector
No connector
Signal
RS- 485
DATA-
DATA+
GND