Acnodes FPC 8084 User Manual page 50

FPC 8084 User s Manual
USB Keyboard Support
Select "Enabled if the system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.
The choice: Enabled, Disabled.
CPU to PCI Write Buffer
W hen this field is
buffered to compensate for the speed differences between the CPU and
the PCI bus. W hen "Disabled , the writes are not buffered and the CPU
must wait until the write is complete before starting another write cycle.
PCI Dynamic Bursting
This item is to enable/ disable the PCI dynamic bursting function.
PCI Master 0 WS Write
W hen Enabled , writes to the PCI bus are executed with zero wait
states.
PCI Delay Transaction
The chipset has an embedded 32-bit posted write buffer to support delay
transactions cycles.
specification version 2.1.
PCI#2 Access #1 Retry
W hen Disabled , PCI#2 will not be disconnected until access finishes
(default). W hen Enabled , PCI#2 will be disconnected if max retries
are attempted without success.
AGP Master 1 WS Write
W hen Enabled , writes to the AGP (Accelerated Graphics Port) are
executed with one wait states.
AGP Master 1 WS Read
W hen Enabled , read to the AGP (Accelerated Graphics Port) are
executed with one wait states.
48
Enabled , writes from the CPU to the PCI bus are
Select Enabled to support compliance with PCI
The default setting is Disabled.