Acnodes FPC 8084 User Manual page 40

FPC 8084 User s Manual
Date
The date format is <day>, <date> <month> <year>.
show the calendar.
The day of week, from Sun to Sat, determined by the
day
BIOS, is read only
The date, from 1 to 31 (or the maximum allowed in the
date
Month), can key in the numeric al / function key
month The month, Jan through Dec.
year
The year, depends on the year of BIOS
Time
The time format is <hour> <minute> <second> accepting either function
key or numerical key.
military-time clock.
IDE Primary Master / Primary Slave / Secondary Master /
Secondary Slave
This category identifies the type of the channel that is installed in the
computer. There are 45 predefined types and 2 user definable types for
Enhanced IDE BIOS.
user-definable.
Press <PgUp>/<+> or <PgDn>/< > to select a numbered hard disk type
or type the number and press <Enter>.
the drive in the system must match with the drive table.
will not work properly if the improper information within this category is
entered. If the disk drive type does not match or is not listed, the Type
User is used to define the drive type manually.
If the Type User is selected, related information has to be entered.
Enter the information directly from the keyboard and press <Enter>.
This information should be provided in the documentation from the hard
disk vendor or the system manufacturer.
If the controller of HDD interface is ESDI, select "Type 1". If
the controller of HDD interface is SCSI, select "None".
If the controller of HDD interface is CD-ROM, select "None".
number of
CYLS.
cylinders
HEADS number of heads SECTORS
PRECOMP
write precom
If there is no hard disk drive installed, select NONE and press <Enter>.
38
The time is calculated based on the 24-hour
For example, 1 p.m. is 13:00:00.
Type 1 to Type 45 are predefined. Type User is
Note that the specifications of
LANDZONE
MODE
Press <F3> to
The hard disk
landing zone
number of
sectors
HDD access
mode