Madison Park Salina Recliner Assembly Instructions

Madison Park Salina Recliner Assembly Instructions

Advertisement

Quick Links

Important safety instructions:
Please read carefully all instructions before assembling the table.
For your safety and ease,assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
• Do not discard any content until assembly completed to avoid accidentally discarding small parts or
hardware
• Take out all parts and hardwares from box .

Parts List

Item
Description
P1
Front Legs
P2
Right Back Leg
P3
Left Back Leg
P4
Left Wing
P5
Right Wing
P6
Backrest
P7
Chair Seat

Hardware List

Item
Description
H1
Plastic Washer
Bolts
H2
φ5/16*1"
Bolts
H3
φ4/16*1-9/16"
Lock Washers
H4
φ5/16"
Flat Washers
H5
φ4/16"
Flat Washers
H6
φ5/16"
Allen Wrench
H7
φ4/16"
Allen Wrench
H8
φ5/16"
Step 1.Assemble the chair on a flat,soft surface such as carpet or cloth to prevent scratching the finish. Take out four legs and
hardware from the box which is in the seat.Then turn the chair seat upside down.Extend the Footrest to open and take out
wings from inner box.Return the Footrest to original position.
DRAWING
QTY
2
1
1
1
1
1
1
DRAWING
QTY
2
6
2
6
2
6
1
1
X2
X1
X1
X2
X2
X6
X6
X1
X6
X2
ASSEMBLY INSTRUCTIONS
Salina Recliner
X1
X1
Page 1 of 2
X1
X1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Salina Recliner and is the answer not in the manual?

Questions and answers

Summary of Contents for Madison Park Salina Recliner

  • Page 1 ASSEMBLY INSTRUCTIONS Salina Recliner Important safety instructions: • Please read carefully all instructions before assembling the table. • For your safety and ease,assembly by two or more adults is recommended. • Keep instructions for future use. Pre-assembly: • Do not discard any content until assembly completed to avoid accidentally discarding small parts or hardware •...
  • Page 2 Step 2.Attach the front legs(P1) to chair seat(P7) with plastic washer (H1) by turning the legs clockwise. Using bolts (H2), lock washers (H4), flat washers (H6), attach back legs (P2,P3) to chair seat (P7).Tighten bolts (H2) with allen wrench (H8). Remove the plastic caps from screw heads before attaching legs.

Table of Contents