Canon Pixma MP800R User Manual page 90

2
Connect the Bluetooth Unit BU-20 to the Direct Print Port.
3
Set the print setting.
See "Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone" on
page 84.
4
Start printing from a mobile phone.
When you select the device name, select the initial value "Canon MP800R-1."
If you are required to enter the passkey, enter the initial value "0000."
You can change the device name of the machine, passkey, and so on in Bluetooth settings
on the machine. See
Note
Communication is possible up to about 32.8 ft./10 m depending on the conditions below. The
printing speed may change depending on the following conditions:
– Presence of obstacles between the communication equipment and radio wave conditions.
– Presence of magnetic fields, static electricity or electromagnetic interference.
– Receiver sensitivity and antenna performance of the communication equipment.
For the transmittable data, see
88 Printing Photographs from a Wireless Communication Device
"Changing the Bluetooth Settings - Bluetooth settings" on page
"About transmittable data" on page 87.
Chapter 6
89.