Canon Pixma MP800R User Manual page 100

When using Mac OS X
For the machine to start scanning when [Color] or [Black] is pressed, you need to set MP
Navigator as the starting application software in Image Capture under [Applications] of Mac
OS X.
Important
If you are using Mac OS X v.10.4, the settings below are not necessary.
Make sure that the MP Navigator is installed and that the Macintosh is connected to the
machine before starting up Image Capture.
If you are using Mac OS X v.10.3.x
Select [Applications] from the [Go] menu, then double click [Image Capture]. Click
[Options] at lower left of the scanner window, select [MP Navigator 2.1] from [Application to
launch when scanner button is pressed], then click [OK]. Select [Quit Image Capture] from
the [Image Capture] menu to exit Image Capture.
Important
If you select [Preferences] from the [Image Capture] menu, click [Scanner], and mark [Use
TWAIN software whenever possible], [Options] is not displayed. In this case, click [Use
TWAIN software whenever possible] to uncheck the option, exit Image Capture, then start it
again.
If you are using Mac OS X v.10.2.4 or later
Select [Applications] from the [Go] menu, then double click [Image Capture]. Select
[Preferences] from the [Image Capture] menu. Select [Others] from [When a scanner
button is pressed, open], select [MP Navigator 2.1] from [Applications], then click [Open].
Select [Quit Image Capture] from the [Image Capture] menu to exit Image Capture.
1
Press [ON/OFF] to turn on the machine.
See "Turning on the Machine" on page
2
Load the document on the Platen Glass.
For details on how to load documents, see
For details on setting film originals, see
3
Select the connected computer to use.
(1) Press [SCAN].
The computer selection screen is displayed.
98 Scanning Images
18.
"Loading Documents" on page
"Scanning a Film" on page
19.
67.
Chapter 8