Changing The Paper Source - Canon Pixma MP800R User Manual

Continuous printing on the same type/size of paper by using both the
Auto Sheet Feeder and Cassette together
If the Auto Sheet Feeder or Cassette runs out of paper, the paper source automatically switches
to the other one. This is useful for printing onto a large volume of paper. To use this feature, you
can select this setting with the printer driver beforehand.
Important
This feature can be used only when printing from a computer.
This feature can be used only when paper of the same size and media type are loaded in
the Cassette and Auto Sheet Feeder.
Note
For information on page size, media type, and paper support load limit for Auto Sheet
Feeder or Cassette, see
For information on the printer driver settings, refer to the Printer Driver Guide.
(A) If the Auto Sheet Feeder runs out of paper, the paper source automatically changes to the
Cassette.

Changing the Paper Source

Before printing, confirm that the location where you have loaded paper is selected as a paper
source. Press [Feed Switch] to change the paper source.
(A) Auto Sheet Feeder Lamp
(B) [Feed Switch]
(C) Cassette Lamp
24 Before Printing
"Recommended Paper and Requirements" on page
(A)
(B)
(C)
20.
(A)
Chapter 1