Aligning Print Head Automatically - Canon Pixma MP800R User Manual

(3) Use [ ] or [ ] to select <Yes> and then press [OK].
The machine starts the Print Head deep cleaning.
Important
The process takes about 90 seconds to complete, so simply wait until the Alarm Lamp stops
flashing.
3
Check the status of the Print Head.
(1) Print the nozzle check pattern to verify that the Print Head nozzles are clean.
See "Printing the Nozzle Check Pattern" on page
When one specific color only does not print, see
(2) If the problem remains, turn off the machine's power for at least 24 hours, and perform
deep cleaning of the Print Head again.
(3) If the problem still remains, the Print Head may be damaged. Contact the Canon
Customer Care Center.

Aligning Print Head automatically

If the ruled lines are shifted after running the Print Head maintenance, align the Print Head.
There are two ways to align the Print Head, automatic or manual. First, try adjusting the Print
Head automatically. If the automatic Print Head alignment does not work or if you wish, you can
adjust the Print Head manually. See
Note
The Cassette does not feed paper for aligning the Print Head. Load paper in the Auto
Sheet Feeder.
Ensure that the Inner Cover is closed.
1
Press [ON/OFF] to turn on the machine.
See "Turning on the Machine" on page
2
Execute automatic Print Head alignment.
(1) Display the Maintenance screen.
See "Performing Maintenance" on page
120 Routine Maintenance
(3)
116.
"Replacing an Ink Tank" on page
"Adjusting the Print Head Manually" on page
18.
115.
108.
130.
Chapter 11