Canon Pixma MP800R User Manual page 27

Note
Press [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when feeding paper from the
Auto Sheet Feeder and the Cassette Lamp is lit when feeding paper from the Cassette.
You can also select the paper source with the printer driver when printing from the
computer. For details, refer to the Printer Driver Guide.
Loading the Print Media in the Auto Sheet Feeder
Loading Paper
Note
For detailed information on the specialty media Canon provides for use with its various
printers, see "Recommended Paper and Requirements" on page
1
Flatten the four corners of the paper before loading it.
Note
Align the edges of paper neatly before loading. Loading paper without aligning the edges
may cause paper jams.
When paper is curled, hold the opposing curled corners and gently bend them in the
opposite direction until the paper becomes completely flat. See
page 138.
2
Prepare to load paper.
(1) Open the Paper Support, then pull out the Paper Support Extension to support the paper.
(2) Press the Open Button to open the Paper Output Tray.
(3) Pull out the Paper Output Tray Extension completely.
Note
After printing, to put back the Paper Output Tray Extension, push it back while raising it a
little.
Chapter 1
20.
"Paper is curled." on
Before Printing 25