Loading Documents To Copy Or Scan - Canon Pixma MP800R User Manual

The Screen-saver Mode
The LCD goes out if the machine is not operated for 5 minutes. Press any button to restore the
display. You cannot change the period before the LCD goes out.

Loading Documents to Copy or Scan

This section describes how to load the document on the Platen Glass.
Document Requirements
The documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Document
type
Size (W x L)
Thickness
Loading Documents
Load documents that you want to copy or scan on the Platen Glass. For how to load a photo,
see "Scanning a Photo" on page
Note
Make sure any glue, ink, correction fluid, or the like is completely dry before loading the
document on the Platen Glass.
1
Lift the Document Cover.
2
Load your document on the Platen Glass.
Place your document face down on the Platen Glass.
Align the upper left corner of your document with the alignment mark on the upper left
corner of the Platen Glass.
Chapter 1
Documents
Photographs
Book
* For details on positive and negative 35 mm film strip and 35 mm slides, see
Printing from Photo or Film" on page
Max. 8.5" x 11.7" / 216 x 297 mm
Max. 0.8" / 20 mm
65. For how to load a film, see
65.
"Scanning a Film" on page
Before Printing
"Photo
67.
19