1. Manuals
  2. Brands
  3. NewLine Manuals
  4. Bathroom Fixtures
  5. Curved
  6. Instruction manual

NewLine Curved Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Important!
1. When you receive your Newline shower check contents for any freight damage.
2. Advise Newline on 0508 639 5463 if any damage has occurred or a defect
identified within 8 hours of receiving the goods so this can be rectified.
3. Do not install any faulty product as this will invalidate later claims.
April 2020
Curved
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Curved and is the answer not in the manual?

Questions and answers

Related Manuals for NewLine Curved

Summary of Contents for NewLine Curved

  • Page 1 1. When you receive your Newline shower check contents for any freight damage. 2. Advise Newline on 0508 639 5463 if any damage has occurred or a defect identified within 8 hours of receiving the goods so this can be rectified.
  • Page 2 TOOLS REQUIRED AFTERCARE Newline recommend squeegeeing down the glass after every shower and cleaned weekly with a microfiber cloth, mild detergent and water. Rinse with clean water and squeegee and wipe dry. ENSURE YOU TICK THE SPECIFIC BOXES THAT APPLY AS YOU PROGRESS Curved Shower: Ensure the floor is level and the walls are plumb and flat.
  • Page 4 SHOWER TYPE WALL CHANNEL ADJUSTMENT TRAY TYPE 900mm*900mm 868mm(Minimum) to 888mm(Maximum) High Profile Tray 1000mm*1000mm 968mm(Minimum) to 988mm(Maximum) High Profile Tray 915mm*915mm 883mm(Minimum) to 898mm(Maximum) Low Profile Tray 1015mm*1015mm 983mm(Minimum) to 998mm(Maximum) Low Profile Tray NOTE: Make sure the correct shower is used on the correct tray. Walls out of plumb will not allow for full minimum / maximum options.
  • Page 5 Install frame to wall profiles Adjust/align frame to tray edge...
  • Page 6 Door Component Details Door Parts Door Install Press button...
  • Page 7 Align Frame, Plumb and secure to Wall Channel Caps Adjust rollers but do not Align shower within wall Finally adjust doors to align. over tighten. profiles. Fasten frame Put bump stop covers on. to wall profiles.
  • Page 8 Apply silicone to outer line as indicated. Seal the join between wall profile and frame, 150mm up from base on both sides. CONTACT Freephone: 0508 639 5463 Phone: 09 444 2053 Fax: 09 443 0044 Email: info@newline.co.nz www.newline.co.nz...

Table of Contents