Table of Contents
Advertisement
Quick Links
Important!
1. When you receive your Newline shower check contents for any freight damage.
2. Advise Newline on 0508 639 5463 if any damage has occurred within 8 hours of
receiving the goods so this can be rectified or a defect identified.
3. Do not install any faulty product as this will invalidate later claims.
April 2020
Neo 900, 955, 1000 & 1055
INSTRUCTION MANUAL
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for NewLine Neo 900
Summary of Contents for NewLine Neo 900
- Page 1 1. When you receive your Newline shower check contents for any freight damage. 2. Advise Newline on 0508 639 5463 if any damage has occurred within 8 hours of receiving the goods so this can be rectified or a defect identified.
- Page 2 TOOLS REQUIRED AFTERCARE Newline recommend squeegeeing down the glass after every shower and cleaned weekly with a microfiber cloth, mild detergent and water. Rinse with clean water and squeegee and wipe dry. ENSURE YOU TICK THE SPECIFIC BOXES THAT APPLY AS YOU PROGRESS 2-Sided Shower: Ensure the floor is level and the walls are plumb and flat.
- Page 3 NEO SHOWER COMPONENT LIST: Back door seal Seal end caps Wall profile Corner post Handle K7072 K3829 Chrome K7109 White K7119 Bottom door Pivot mounting cap Replacement Screw Pack - Chrome & White K2295 seal K6808 Wall plug (concrete)
- Page 4 SHOWER TYPE WALL CHANNEL ADJUSTMENT ACRYLIC TRAY 900mm *900mm 869mm (Minimum) to 889mm (Maximum) High Profile 1000mm *1000mm 969mm (Minimum) to 989mm (Maximum) High Profile 955mm *955mm 922mm (Minimum) to 942mm (Maximum) Low Profile 1055mm *1055mm 1024mm (Minimum) to 1044mm (Maximum) Low Profile Walls out of plumb will not allow for full minimum / maximum options.
- Page 5 Place fixed glass into wall profiles. Position corner posts on fixed glass.
- Page 6 Install back of door seal and fix caps top and bottom. Fit door set to fixed glass.
- Page 7 A. Equalise shower screen to tray edge. B. Square up door frame, adjust pivot mounts to align door to frame. C. Fit pivot mounting cover caps. D. Drill and fasten as indicated. Fastening parts. Fit bottom seals.
- Page 8 Seal the join between wall profile and frame,150mm up from base on both sides. CONTACT Freephone: 0508 639 5463 Phone: 09 444 2053 Fax: 09 443 0044 Email: info@newline.co.nz www.newline.co.nz...
Need help?
Do you have a question about the Neo 900 and is the answer not in the manual?
Questions and answers