Table of Contents
Advertisement
Attaching Adapter Plate to Projector
6
Align shoulder on connection block opposite notch in
adapter plate (L). Attach adapter plate (L) to
connection block from projector mount assembly (B)
using two #10-32 x 3/8" serrated washer head socket
pin screws (C) as shown in figure 6.1.
7
Attach adapter plate (L) to projector using four
M6 x 12 mm serrated washer head socket pin
screws (U) and 0.25" spacers (X).
NOTE: Shoulder of connection block indicates
the back of projector.
Visit the Peerless Web Site at www.peerlessmounts.com
NOTCH INDICATES
FRONT OF
PROJECTOR
U
L
X
PROJECTOR
C
10 of 12
ISSUED: 03-17-08 SHEET #:055-9499-4 08-15-08
For customer care call 1-800-865-2112 or 708-865-8870.
CONNECTION
BLOCK
SHOULDER
L
fig. 6.1
SHOULDER
CONNECTION
BLOCK
Advertisement
Table of Contents
