Spring V16 HC RW Quick Start Manual page 3

2 - Operation
Turn on the controller by pressing the up button.
The controller will flash between the current speed setting and StP.
Use the up or down button to change between the speed setting. This can
be set from 1 to 4, 4 being the fastest.
,
To wind the reel, press and hold the wind button. Release the button when
winding is complete. Whilst winding the controller will stop displaying StP.
Press and hold the up and enter buttons to change the break settings. brA
will be displayed. This adjusts the amount of break on the motor during
reel extension and can be set between 1 and 100.
+
The brA value can be adjusted by pressing the up or down button. Press
enter to set the value.
,
To turn the controller off, press and hold the enter button.